[PORTALNAME]

Course Criteria

Add courses to your favorites to save, share, and find your best transfer school.

  • ENGR 202: Water Distribution Systems

    1.00 Credits
    The University of Montana

    An introduction to water distribution theory and design practice. A project-oriented course that includes water supply, storage, distribution, and computer analysis of water distribution networks. Spring semester.
    ShareENGR 202 - Water Distribution Systems
    Favorite

  • ENGR 302: Engineering Mechanics I:Statics

    3.00 Credits
    The University of Montana

    Equilibrium of bodies under the action of forces. Force systems and resultants; equilibrium of mechanical systems; trusses, frames, and machines; centroids and centers of mass; shear and moments in beams; hydrostatics; friction; and virtual work. Introduction to mechanics of solids and computer analysis of structures, as time permits. Emphasis on solving practical engineering problems in complete, documented style. Prerequisite: Grade of "C" or better in PHYS 205 or permissionof instructor. Spring semester.
    ShareENGR 302 - Engineering Mechanics I:Statics
    Favorite

  • ENGR 303: Engineering Mechanics II:Solids

    3.00 Credits
    The University of Montana

    An introduction to the mechanics of deformable solids. Topics covered include stress, strain, rotation-of-axes transformations, constitutive relations, equilibrium, compatibility requirements, stability, and deformation of structural elements. Uni-axial, torsion, bending, and shear loads on and deformations of prismatic bars are also studied together with Euler buckling of slender columns. Three credits of lecture. Prerequisites: Grades of "C" or better in ENGR 302 and MA232. Fall semester.
    ShareENGR 303 - Engineering Mechanics II:Solids
    Favorite

  • ENGR 304: Engineering Mechanics III:Dynamics

    3.00 Credits
    The University of Montana

    Continuation of ENGR 301. Motions of bodies under the action of forces; kinematics and kinetics of particles, systems of particles, and rigid bodies; work-energy and impulse-momentum; area and mass moments of inertia. Emphasis on solving practical engineering problems in complete, documented style. Prerequisites: Grades of "C" or betterin ENGR 301 and MA 334. Spring semester.
    ShareENGR 304 - Engineering Mechanics III:Dynamics
    Favorite

  • ENGR 305: Electronics and Circuit Analysis I

    4.00 Credits
    The University of Montana

    An introductory survey of the behavior of electrical circuits. Review of current, voltage, and passive circuit elements (resistors, capacitors, and inductors). Kirchhoff's Laws, network theorems, and basic network analysis. General characteristics of amplifiers and electronic instrumentation. Introduction to operational amplifiers and active elements (transistors). Laplace transform analysis of transient (switching) response, and complex phasor analysis of sinusoidal steady-state response. Three (3) hours lecture and one 2-hour laboratory per week, in which students build and test circuits and learn how to use typical circuit simulation software (PSPICE). Prerequisites: Grades of "C"or better in PHYS 202 or PHYS 206, and MA 122 or MA 131. Fall semester.
    ShareENGR 305 - Electronics and Circuit Analysis I
    Favorite

  • ENGR 306: Electronics and Circuit Analysis II

    4.00 Credits
    The University of Montana

    A continuation of PHYS/ENGR 305. Systematic node-voltage and mesh-current methods of circuit analysis. Network transfer functions and frequency spectra. Mutual inductance and transformers. Diode circuits and the behavior of single-transistor amplifiers using field-effect or bipolar-junction transistors. Analysis and design of digital logic circuits. Principles of operation and interfacing of typical laboratory instruments. Three hours lecture and one 2-hour laboratory per week. Prerequisite: Grade of "C" or better in PHYS 206 and MA 232. Offeredspring semesters if warranted by sufficient demand.
    ShareENGR 306 - Electronics and Circuit Analysis II
    Favorite

  • ENGR 307: Fluid Mechanics

    3.00 Credits
    The University of Montana

    A first course in fluid mechanics for engineering majors. Topics covered include fluid properties, fluid statics, fluid motion, pressure variations in fluid flows, momentum principles, energy principles, dimensional analysis and similitude, surface resistance, flow in conduits, flow measurements, drag, and lift. Two and one-half credits of lecture and one-half credit of laboratory. Prerequisites: Grades of "C" or better inMA 232 and ENGR 302. Fulfills Writing Intensive requirement. Fall semester.
    ShareENGR 307 - Fluid Mechanics
    Favorite

  • ENGR 308: Thermodynamics

    3.00 Credits
    The University of Montana

    A practical introduction to thermodynamics for engineering students. Fundamental state variables are defined (e.g., temperature, pressure, energy, enthalpy, entropy, etc.), and the three laws of thermodynamics are extensively discussed and illustrated. Applications include power systems, gas turbines, and refrigerators. Three hours lecture per week. Prerequisites: Grades of "C" or better in PHYS 205-206 and MA233. Spring semester.
    ShareENGR 308 - Thermodynamics
    Favorite

  • ENGR 309: Geotechnical Engineering

    3.50 Credits
    The University of Montana

    An introduction to geotechnical engineering. Topics covered include an introduction to geology and the classifications of soils, and rocks, and geologic structures. Soil exploration, testing, and classifications are introduced, and soil characteristics and mechanical properties such as compressibility and compaction, permeability and seepage, and stresses in soil structures are also studied. Three credits of lecture and half credit of lab. Prerequisites: Grades of "C" or better in ENGR 303 and ENGR 307.Spring semester.
    ShareENGR 309 - Geotechnical Engineering
    Favorite

  • ENGR 310: Structures I

    3.00 Credits
    The University of Montana

    This is the first in a series of 3 courses in structural analysis and design. The primary objective of this course is to introduce the principles and methods of analysis for trusses, beams, and frames so that students develop the understanding and the skills necessary to analyze and design statically determinate as well as statically indeterminate structures. While emphasis is on modern computer methods of analysis, elementary methods are also studied so students gain an understanding and "feel"for the behavior of structures. Prerequisites: Grade of "C" or better inENGR 303. Spring Semester.
    ShareENGR 310 - Structures I
    Favorite
To find college, community college and university courses by keyword, enter some or all of the following, then select the Search button.
(Type the name of a College, University, Exam, or Corporation)
(For example: Accounting, Psychology)
(For example: ACCT 101, where Course Prefix is ACCT, and Course Number is 101)
(For example: Introduction To Accounting)
(For example: Sine waves, Hemingway, or Impressionism)
Distance:
of
(For example: Find all institutions within 5 miles of the selected Zip Code)